Gefen Dual Link DVI Extender
Over to CAT-6a kabler
Merknader!
- Støtter HDCP kun ved Single Link DVI
- For rekkevidde på 60m kreves Cat.6A kabler
- Rekkevidde ved bruk av andre kabeltyper vil variere. Anbefales ikke.
The Dual-Link DVI over 2CAT6 extends any dual-link DVI source, to a display up to 200 feet (60 meters) away at resolutions to 3840 x 2400 using two CAT-6a cables. Extending dual-link resolutions over standard DVI cables have a limitation of 15 feet (5 meters). Exceeding this distance requires additional repeaters and/or boosters. The Dual-Link DVI over 2CAT6 Extender provides an easy to install solution, using CAT-6a cables. This product also extends RS-232 using the same CAT-6a cable.
How It Works
Place the Dual-Link DVI over 2CAT6 Extender Sender unit next to the dual-link DVI source. Use the included dual-link DVI cable to connect the source to the Sender unit. Connect the Receiver unit to the display with a dual-link DVI cable. Connect an RS-232 serial cable from the RS-232 port on the Sender unit to the RS-232 control device. Connect the RS-232 port on the Receiver unit to the RS-232 device. Use two CAT-6a cables, up to 200 feet (60 meters), to connect the Sender unit to the Receiver unit. Connect the included locking power supplies to the Sender and Receiver unit, then connect both power cables to available electrical outlets.
Note: This product supports HDCP pass-through only when using a single-link source.
Features:
•Extends dual-link DVI and RS-232 up to 200 feet (60 meters) over two CAT-6a cables
•Supports dual-link resolutions up to 3840 x 2400
•EDID management for Local and Pass-through modes
•Firmware upgradable via RS-232
•Trim pot adjustment to compensate for cable skew
•Locking Power Supplies
•Rack-mountable
Specifications:
•Video Amplifier Bandwidth: 2 x 165MHz
•Input Video Signal: 1.2V p-p
•Input DDC Signal: 5V p-p (TTL)
•Video Input Connector (Sender): (1) DVI-I, 29-pin, female (digital only)
•Video Output Connector (Receiver): (1) DVI-I, 29-pin, female (digital only)
•RS-232 Port (for firmware upgrades only) (Sender / Receiver): (1) DB-9, male
•Link Connectors (Sender / Receiver): (2) RJ-45, Shielded
•Power Supply (Sender / Receiver): 5V DC, Locking
•Operating Temperature: 0 - 40 °C
•Power Consumption (Sender / Receiver): 10W (max.)
•Dimensions: 8.4" W x 4.2" D x 1.6" H
•Shipping Weight 4.6 lbs.
Package Includes:
•(1) Gefen Dual-Link DVI over 2CAT6 Extender - Sender unit
•(1) Gefen Dual-Link DVI over 2CAT6 Extender - Receiver unit
•(1) 6 ft. Dual-Link DVI cable (M-M)
•(2) 5V DC Locking Power Supplies
•(1) User Manual