35047
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

Nyhetsmail

Motta nyheter per epost.

      Part of Lagercrantz Group

Gefen Extender HDMI Ser IR Tx/Rx

1xFiberSC Max 330 m HDCP

Varenr:
EXT-HDMI1.3-1FO
EXT-HDMI1.3-1FO Gefen Inc. EXT-HDMI1.3-1FO Gefen Extender HDMI Ser IR Tx/Rx 1xFiberSC Max 330 m HDCP
EXT-HDMI1.3-1FO Gefen Inc. EXT-HDMI1.3-1FO Gefen Extender HDMI Ser IR Tx/Rx 1xFiberSC Max 330 m HDCP EXT-HDMI1.3-1FO Gefen Inc. EXT-HDMI1.3-1FO Gefen Extender HDMI Ser IR Tx/Rx 1xFiberSC Max 330 m HDCP EXT-HDMI1.3-1FO Gefen Inc. EXT-HDMI1.3-1FO Gefen Extender HDMI Ser IR Tx/Rx 1xFiberSC Max 330 m HDCP
EXT-HDMI1.3-1FO Gefen Inc. EXT-HDMI1.3-1FO Gefen Extender HDMI Ser IR Tx/Rx 1xFiberSC Max 330 m HDCP
EXT-HDMI1.3-1FO Gefen Inc. EXT-HDMI1.3-1FO Gefen Extender HDMI Ser IR Tx/Rx 1xFiberSC Max 330 m HDCP EXT-HDMI1.3-1FO Gefen Inc. EXT-HDMI1.3-1FO Gefen Extender HDMI Ser IR Tx/Rx 1xFiberSC Max 330 m HDCP EXT-HDMI1.3-1FO Gefen Inc. EXT-HDMI1.3-1FO Gefen Extender HDMI Ser IR Tx/Rx 1xFiberSC Max 330 m HDCP
Extender for HDMI 1.3 over One Fiber w/IR
A Reliable and Simple Solution for Extending HDMI Up to 1000 feet (330m)
 
The HDMI 1.3 RS-232 IR Over One Fiber Extender is a complete solution using Sender / Receiver units to go the distance up to 1000 feet (330 meters) in length, while using only a single strand of multi-mode fiber terminated in SC connection for the extension. It extends all HDMI 1.3 features at 1080p Full HD with Deep Color, multichannel digital audio, supporting lip-sync, CEC, Dolby TrueHD, DTS Master Audio and other optional HDMI features including 3D.
 
The product presents no signal delays between Sender/Receiver units and no disruption from EMI (electromagnetic interference) at long distances. Multichannel digital audio with Dolby TrueHD & DTS-HD Master Audio helps to deliver a great home theater experience. Other features such as the IR back channel and RS-232 serial control is also carried on the same fiber cable, providing convenient, local control of video source devices.
 
A locking power supply provides secure power connection and the locking HDMI connector adds security to the HDMI signal handling. This is truly an integrated extension system to devices that are 1000 feet away.
 
How It Works
Install the Sender unit near the Hi-Def source (using HDMI) and the Receiver unit at the Display side. Connect the supplied HDMI cable between the Sender unit and the Hi-Def source. Another HDMI cable needs to be used to connect from the Hi-Def Display to the Receiver unit. Now connect the single strand of multi-mode SC fiber optic cable from the Sender unit to the Receiver unit. RS-232 and IR are connected in similar fashion between the AV source and Send unit and between the Display and Receiver unit. Plug in the power supplies on both the Sender unit and Receiver unit, and crisp vibrant HDMI will appear on the Display. IR commands from the remote control will allow switching the video source.
 
Use the IR blaster connection on the Sender unit to send IR commands to the A/V source equipment. Use the IR eye on the Receiver unit to extend the functionality of the IR remote.
 
HDMI 1.3 Features:
225 MHz (up to 16 bit YUV 444 supported @ 1080p)
Deep Color
Dolby TrueHD and DTS-HD Master Audio
Lip Sync
CEC Pass-Through
 
Features:
Immune to electromagnetic interference (EMI)
Supporting all HDMI 1.3 features at all resolutions
Up to 1000 ft (330 m) extension distance
Supports video resolutions up to 1080p/60, 2K, and 1920 x 1200
Uses widely available single-strand multi-mode fiber optic cable
HDCP Compliant
 
Specifications:
Video Amplifier Bandwidth: 225 MHz
HDMI Input/Output Connector: Type A 19 Pin
Link Connector: SC Fiber Optic
Input Video Signal:1.2 Volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Power Supply: 5V DC (locking)
Dimensions: 2.75"W x 4.5"H x 1.2"D
Shipping Weight: 3 lbs.
 
Package Includes:
(1) HDMI 1.3 RS232 IR Over Fiber Sender Unit
(1) HDMI 1.3 RS232 IR Over Fiber Receiver Unit
(1) 6 ft. HDMI cable (M-M)
(1) 6 ft. Serial DB9 cable (M-F)
(2) 5V DC Locking Power Supply
(1) User Manual