Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
Handlevogn
Handlevognen er tom.
GC Contact Closure Sensor
2xLeder Kontaktsensor
|
|
GC-SC1 Contact Closure Sensor
The GC-SC1 detects the open-and-closed status of a pair of isolated contacts, such as a relay or switch.
It is ideally suited for detecting contact closure on drapery controllers, thermostats, security contacts, and door strikes.
The GC-SC1 filters out false triggers associated with typical contact bounce. The device can be plugged directly into the Global Caché GC-100 Network Adapter, which connects the sensor to the network. Additionally, the GC-SC1 will work with other controllers that provide 5V power and accept digital logic (TTL) input. The GC-SC1 connector is a standard 3.5mm stereo jack. This sensor can be used with iTach IR connectors in “Sensor” mode, but due to a design alteration must be connected to the unit with an audio crossover cable. The wires that need to be swapped are the tip and the ring.