Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
ISW-1022MT Planet Technology Corp. ISW-1022MT Planet Switch  8-p 10/100TX 2xSFP Industri IP30 DIN ¤ Tilbud

Planet Switch 8-p 10/100TX 2xSFP

Industri IP30 DIN ¤ Tilbud

Planet ISW-1022MT
Enhanced Reliability for Industrial Networks
Tilbud, prisen gjelder så lenge lageret rekker
Husk strømforsyning hvis dette ikke er tilgjengelig fra før.
The PLANET ISW-1022MT Managed Industrial Ethernet Switch is equipped with multiple redundant ring technology and provides 8 10/100Mbps Fast Ethernet and 2 Gigabit TP/SFP combo interfaces delivered in a rugged strong case. It is an industrially (substation) hardened and fully managed with Ethernet Switch specifically designed to operate reliably in electrically harsh, climatically demanding, wide temperature range (-40 to 75 degrees) and centralized power management environments. The ISW-1022MT is the most reliable choice for highly-managed and Fiber Ethernet application.
• Wide Temperature Support
• Industrial Protect 30 Metal Case
• Redundant Ethernet Network
• Manageable
• Power Redundant
• Gigabit / Fiber uplink capability
Key Features
Physical Port
• 8-Port 10/100Mbps Auto MD/MDI-X RJ45
• 2-Port Gigabit TP/SFP combo interface, SFP(Mini-GBIC) supports 100/1000 Dual Mode
• 1 RJ-45 Console interface for Switch basic management and setup
Industrial Conformance
• 12-48V DC, redundant power with polarity reverse protect function
• -40 to 75 Degree C operating temperature
• IP-30 metal case
• Relay alarm for port breakdown and power failure
• FCC Class A, CE compatibility
• Free fall, Shock and Vibration Stability
Rapid Ring
• Rapid Ring, Dual Homing, Couple Ring Topology
• Provides redundant backup feature and the recovery time less than 20ms
Layer 2 Features
• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standards
• Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control
• Supports VLANs
–IEEE 802.1Q Tagged based VLAN
–Port-Based VLAN
–Up to 256 VLANs groups, out of 4K VLAN IDs
• Supports Spanning Tree Protocol
–STP, IEEE 802.1D Spanning Tree Protocol
–RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
• Supports Link Aggregation
–Up to 4 Trunk groups
–Up to 4 ports per trunk group with 800Mbps bandwidth (Full Duplex mode)
–IEEE 802.3ad LACP (Link Aggregation Control Protocol)
–Cisco ether-Channel (Static Trunk)
Quality of Service
• 4 priority queues on all switch ports
• Traffic classification by:
–Port-Based priority
–IEEE 802.1p Class of Service
–IP TOS (Type of Service) priority
• Supports strict priority and Weighted Round Robin (WRR) policies
• Ingress/Egress Bandwidth control on each port
• IGMP Snooping v1 and v2
• IGMP Query mode for Multicast Media application
• IEEE 802.1x Port-Based Authentication
• MAC address Filtering and MAC address Binding
• IP address security management to prevent unauthorized intruder
• Port Mirroring to monitor the incoming or outgoing traffic on a particular port
• Web-based, Telnet, Console Command Line management
• Access through SNMP v1, v2c and v3 set and get requests
• SNMP Trap / SMTP email for alarm notification of events
• System Log Server / Client
• Configuration backup / restore
• E-mail event alert
• TFTP firmware upgrade
Copyright © 2015 Leteng AS - All rights reserved Webshopen er levert av MultiCase Norge AS ( )