Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
GEF-DVI-FM1500 Gefen Inc. GEF-DVI-FM1500 Gefen Extender DVI Tx/Rx 1xFiberSC Max 500-1000 m EDID

Gefen Extender DVI Tx/Rx

1xFiberSC Max 500-1000 m EDID

Produktinfo
GefenPRO DVI-FM1500
Optical DVI Extender with Recordable EDID
-------------------------------------------------------------
Extend a DVI source over a single strand of SC fiber optic cable up to 1000 meters for single-mode and 500 meters for multi-mode
The GefenPRO DVI-FM1500 Optical DVI Extender with virtual EDID programming extends a DVI source up to 3280 feet (1000 meters) using single-mode (50 micron) fiber optic cable. Virtual EDID programming provides fast integration and compatibility with the input video source and the display. Resolutions up to 1920 x 1200 (WUXGA) at 60 Hz are supported.
   
How It Works
Connect the Sender Unit to the DVI source. Connect the Receiver Unit to the DVI display. Use a single strand of SC fiber optic cable to connect the Sender Unit to the Receiver Unit. Use the included 5V DC power supplies to connect both the Sender Unit and the Receiver Unit to available electrical outlets.
Note: When using multi-mode fiber optic cable, DVI can be extended to 1640 feet (500 meters).
Features:
Extends DVI up to 3280 feet (1000 meters) in single-mode
Extends DVI up to 1640 feet (500 meters) in multi-mode
Supports resolutions up to 1920x1200 (WUXGA) @ 60 Hz
Optical signal transmission provides good immunity to electromagnetic interference
Virtual EDID Programming feature provides quick installation and compatibility between source and display
Uses single-mode or multi-mode SC fiber optic cable
Fully Supports DVI 1.0 Specifications and DDC2B via virtual DDC
 
Specifications:
Maximum Pixel Clock: 165 MHz
Input Video Signal: 1.2 Volts p-p
Input DDC Signal: 5 Volts p-p (TTL)
DVI Connector (Sender / Receiver): DVI-D, 19-pin, male
Fiber Optic Connector (Sender / Receiver): SC type
Power Supply: (Sender / Receiver) 5V DC
Power Consumption: 2.5 Watts (max.) per unit
Operating Temperature: 0 ~ 50 °C
Dimensions (Sender / Receiver): 1.5" W x 0.6" H x 2.9" D
Shipping Weight: 2 lbs.
 
Package Includes:
(1) DVI-FM1500 Optical DVI Extender with Recordable EDID - Sender Unit
(1) DVI-FM1500 Optical DVI Extender with Recordable EDID - Receiver Unit
(2) 5V DC power supplies
(1) User Manual

Copyright © 2014 Leteng AS - All rights reserved Webshopen er levert av MultiCase Norge AS (3.14.10.6 )