Gefen HDMI over RGB
Extend HDMI at 1080p over Coax with support for HDMI 1.3!
The Gefen HDMI over RGB Extender sends HDMI 1.3 with support for 1080p, Deep Color and multichannel 7.1 digital audio, all over legacy coaxial cabling.
Integrated Gennum ActiveConnect technology delivers flawless, breathtaking digital audio/video at distances of up to 330 feet (100m).
This is the ideal system for environments that are committed to an RGBHV infrastructure but would still like to step up to the world of digital HDTV.
How It Works
The supplied HDMI cable connects the HDMI source and the Gefen HDMI over RGB Extender Sender unit. The sender mates to your 4- or 5-jack coaxial cable, using the included 5V DC power supply if there are only 4 BNC jacks available. The HDMI over RGB Extender Receiver terminates the BNC extension, then connects to a HDTV. Pristine 1080p HDMI now emerges on the HDTV.
Gefen sells optional IR cables which allow you to hide the Gefen HDMI over RGB Extender Receiver at your viewing location and/or transmit IR remote control signals back to the AV sources over the BNC extension. For more information, please refer to the optional products shown at the left of this page.
Note:
HDMI 1.3 Features:
Lip-Sync Pass Through
340 MHz (up to 16 bit YUV 444 supported @ 1080p)
Deep Color Supported (XV Color Supported)
Dolby TrueHD & DTS Master Supported
CEC Protocol Pass Through
Features:
Connects HDMI sources to remote HDMI-capable display devices over legacy RGBHV cabling
Supports extension distances of up to 150 feet
Supports resolutions of up to 1080p, 2K, and 1920 x 1200
HDMI and HDCP compliant
Extends any IR device
Specifications:
Video Amplifier Bandwidth: 340 MHz
Video Resolutions (max): 2K, 1080P, 1920x1200
Coaxial Connectors: 5 x BNC male
IR back channel : IR blaster
HDMI™ Connector: Type A (19 Pin) Female
Input Video Signal: 1.2V p-p
Input DDC Signal: 5V p-p
Power Supply: 5V DC / 10W each (max) power consumption
Dimensions: 4.25"W x 1.25"H x 3.9"D
Shipping Weight: 3 lbs.
Features:
Connects HDMI sources to remote HDMI-capable display devices over legacy RGBHV cabling
Supports extension distances of up to 150 feet
Supports resolutions of up to 1080p, 2K, and 1920 x 1200
HDMI and HDCP compliant
Extends any IR device
Specifications:
Video Amplifier Bandwidth: 340 MHz
Video Resolutions (max): 2K, 1080P, 1920x1200
Coaxial Connectors: 5 x BNC male
IR back channel : IR blaster
HDMI™ Connector: Type A (19 Pin) Female
Input Video Signal: 1.2V p-p
Input DDC Signal: 5V p-p
Power Supply: 5V DC / 10W each (max) power consumption
Dimensions: 4.25"W x 1.25"H x 3.9"D
Shipping Weight: 3 lbs.