Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
GC-SP1 Global Caché GC-SP1 GC AC/DC Voltsensor 2xLedere Max +/- 24V

GC AC/DC Voltsensor

2xLedere Max +/- 24V

Produktinfo
GC-SP1 AC/DC Voltage Sensor
 
The GC-SP1 monitors the on-and-off status of electronic components by detecting an AC or DC voltage greater than ± 2V.
 
Voltages up to ± 24V can be connected to the GC-SP1 to determine the powered state of equipment, power strips (via a wall adapter), or a  ring condition on a telephone circuit. The GC-SP1 is optically isolated and clamped by a transient voltage suppressor to ensure circuit isolation and protection.
 
The device can be plugged directly into the Global Caché GC-100 Network Adapter, which connects the sensor to the network. Additionally, the GC-SP1 will work with other controllers that provide 5V power and accept digital logic (TTL) input. The GC-SP1 connector is a standard 3.5mm stereo jack.This sensor can be used with iTach IR connectors in  Sensor mode, but due to a design alteration must be connected to the unit with an audio crossover cable. The wires that need to be swapped are the tip and the ring.
Copyright © 2015 Leteng AS - All rights reserved Webshopen er levert av MultiCase Norge AS (3.15.2.33 )