Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
FeONIC-F1.3 FeONIC Technology FeONIC-F1.3 FeONIC F1.3 Audio Drive Kontakthøyttaler 20w IP55 ¤ Tilbud

FeONIC F1.3 Audio Drive

Kontakthøyttaler 20w IP55 ¤ Tilbud

Produktinfo
FeONIC F1.3 Audio Drive
 
Tilbud, prisen gjelder så lenge lageret rekker
 
FeONIC F-Drives can be used to convert new and existing structures of commonly used resonant building materials into
high quality loudspeakers. The structural surface performs as a highly intelligible powerful distributed mode (non-directional)
speaker suitable for both audio reproduction and public address systems, satisfying the EN60849 standard for acoustic quality in public places.
 
The F-Drive is unlike traditional speaker technology because it
uses a very high powered magnetostrictive smart material as the
driver instead of a moving coil. The material was originally
developed by the US military for sonar applications and is now
de-restricted for commercial use. The magnetic field that causes
the smart material inside the sounder to react is created by drive
coils around the material. The smart material sounder exhibits
much superior properties over conventional speaker
technologies.
 
Technical Specification for F1.3 on Glass Panel (10mm x 1m x 1m)
Impedance: 4 Ohms
Integrated Circuitry: 3 way cross over & circuit protection
Operating temperature range: -20oC to +80oC* (-50oF to 176oF)
Storage temperature range: -20oC to +100oC* (-50oF to 212oF)
Weight: c1500g
Dimensions: 57mm (W) x 118mm (L) x 55.5mm (H)
Mounting method: 3M VHB adhesive tape or optional
mounting plate with screw holes
Connection to amplifier: Binding posts
Recommended amplifier power
rating1:
100Watt / 50Watt 100V line with
additional transformer
Typical power consumption 20Watt
Sensitivity2: 69dBA @ 1m
Typical Bandwidth: 80Hz-20,000Hz
Sound Pressure Level3: Peak 98dBA (SPL 95dBA) @ 1kHz 1m
Speech Transmission Index /
Common Intelligibility Scale4:
0.60 to 0.75 /
0.78 to 0.88
Environmental protection: IP55 (Impervious to moisture damage**)
1Recommended amplifier power rating for optimum performance, 2Sensitivity measured with 1kHz sine wave at 1Watt, 3Max
Sound Pressure Level (SPL) achieved with sounder mounted on same side as measurement with 1kHz sine signal just
prior to input signal distorting, 4STI/CIS values, measured to IEC Standard 60268-16, are typical values since it is
dependent on acoustics of installation site.
Copyright © 2015 Leteng AS - All rights reserved Webshopen er levert av MultiCase Norge AS (3.15.2.33 )