Vi har åpent fra 07:00-16:00  (man-fre)

Gefen KVM over IP Rx HDMI

HDMI USB RS232 Syner-G

Varenr: EXT-HDKVM-LANRX
4 400,00
-+
1 på lager
BeskrivelseTilbehørAlternativerSupport
Beskrivelse
Gefen KVM over IP (HDMI)
 
Extend and Distribute HDMI, USB, RS-232, IR, and 2-way audio over a Local Area Network using any combination of HDMI, DVI, and VGA Senders and Receivers
  
The Gefen HD KVM over IP extends HDMI, USB, 2-way analog audio, RS-232, and IR, over a Gigabit Local Area Network. Resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA) are supported. The Senders and Receivers can be automatically or manually configured to unique IP addresses to allow the connection of multiple units to the same network. Multiple Receiver units can simultaneously connect to any Sender unit within the network including the Gefen KVM over LAN products with HDMI, DVI, or VGA video, to create a virtual crosspoint matrix of just over 65,000 Sender and Receiver units total, depending on the network bandwidth and number of ports on the network switch (see Note) When using HDCP-encrypted content, only HDMI Senders and Receiver units can accept and display the content. Each Receiver unit has a built-in Ethernet switch and two additional RJ-45 Ethernet ports to allow for the connection of computers and other IP-enabled devices. USB 2.0 data rates up to 480 Mbps are supported in addition to backward-compatibility with USB 1.1. Each Receiver unit provides two USB ports with up to 500mA current draw per connector, providing access to keyboard, mouse, and other compatible devices. Bi-directional analog audio capability allows audio to be transported between the Sender and the Receiver units. The built-in mic pre-amp on the Receiver unit ensures compatibility with a variety of microphones. IR commands from the Receiver side can be extended to sources connected to any of the Sender units. RS-232 serial control can also be extended between each Sender and Receiver. The built-in web server interface makes operation, set-up, and configuration simple and intuitive. The Gefen HD KVM over IP is the perfect solution for large scale remote workstation access and digital signage applications.
  
Note: A Gigabit switch is required. The Gigabit switch must support 8k jumbo frame packets in order for multicast mode to operate. If your LAN is not dedicated to Gefen KVM-LAN products exclusively, then a managed switch is highly recommended.
 
Features
•Extends HDMI, USB, RS-232, bi-directional stereo analog audio, and IR over IP, using a Gigabit Local Area Network
•Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA)
•Supported HDMI Features:
?HDCP
?Deep Color
?LPCM 7.1 audio, Dolby® TrueHD, and DTS-HD® Master Audio™
?Lip-Sync pass-through
•Built-in web interface facilitates intuitive set up and operation
•Any of the Senders within a network can be accessed by any Receiver unit via a web browser on a mobile device or computer, or by using the Gefen Keyboard Switching Controller software (available for download at (www.gefen.com)
•Supports a total of just over 65,000 Sender and Receiver units, depending on  the network bandwidth and number of ports on your network switch
•USB 2.0 data rates up to 480 Mbps and backward-compatibility with USB 1.1
•Three-port Gigabit Ethernet switch built into the Receiver unit
•Mode button on Sender for sharpness or motion optimization of image
•Field-upgradable firmware via web server interface
•Locking power supply connectors
•1U tall, half-rack width enclosures are rack-mountable using EXT-RACK-1U
•Surface mounting brackets included
 
Specifications
•Maximum Pixel Clock: 225 MHz
•Video Input Connector (Sender): (1) HDMI Type A 19-pin, female, locking
•Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female, locking
•Line Input (Sender): (1) 3.5mm mini-stereo jack
•Line Output (Sender): (1) 3.5mm mini-stereo jack
•Mic Input (Receiver): (1) 3.5mm mini-stereo jack
•Line Output (Receiver): (1) 3.5mm mini-stereo jack
•USB Host Interface (Sender): (1) USB Type B, female
•USB Device Connectors (Receiver): (2) USB Type A, female
•RS-232 Connector (Sender): (1) DB-9, female
•RS-232 Connector (Receiver): (1) DB-9, male
•IR Emitter (Sender): (1) 3.5mm mini-mono jack
•IR Extender (Receiver): (1) 3.5mm mini-stereo jack
•IR Extender Type: EXT-RMT-EXTIRN
•Ethernet connector (Sender): (1) RJ-45, shielded
•Ethernet connectors (Receiver): (3) RJ-45, shielded
•Mode button (Sender): (1) tact-type
•ID Selector switch (Sender): (1) rotary-type
•Switch button (Receiver): (1) tact-type
•Reset button (Receiver): (1) tact-type, recessed
•Link Indicator (Sender/Receiver): (1) LED, green
•Power Indicator (Sender/Receiver): (1) LED, blue
•Power Supply (Sender / Receiver): 5V DC, locking
•Power Consumption (Sender / Receiver): 10W (max.)
•Dimensions (Sender / Receiver) (W x H x D): 8.4" x 1.7" x 4.5" (213mm x 43mm x 113mm)
•Shipping Weight: 
 EXT-HDKVM-LANTX: 5.7 lbs. (3.0 kg)
 EXT-HDKVM-LANRX: 4.6 lbs. (2.0 kg)
 
HD KVM over IP - Receiver Package
SKU:EXT-HDKVM-LANRX
UPC: 845344092195
 
Includes:
 
•(1) HD KVM over IP - Receiver Unit (EXT-HDKVM-LANR)
•(1) L-shaped Mounting Bracket with screws (EXT-MP-C01)
•(1) 5V DC Power Supply (EXT-PS526AIP-LP)
•(1) Quick-Start Guide (QSG-HDKVM-LANRX)
Tilbehør
Alternativer
Support
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.