Vi har åpent fra 07:00-16:00  (man-fre)

Gefen Kontroller RMT-4 (2 Knapper)

Matrix Fjernkontroll RS232/RJ45 ¤

Varenr: EXT-RMT-MATRIX-848
1 450,00
1 på lager
Gefen 8x8 Matrix RMT Remote
The 8x8 Matrix RMT Remote control lets you control your Matrix switcher from up to 1000 feet away. A length of CAT5 or CAT6 network cable extends from the Matrix to the remotely located 8x8 Matrix RMT Remote Control. Three methods may be used to control the Matrix unit from the remote location: IR Control, RS-232 Control, and Push-Button Control.
How It Works
Relocate the 8x8 Matrix RMT Remote up to 1000 feet from the Matrix. Connect the two devices with up to 1000 feet of CAT5/CAT6 cable. To control the Matrix with the included handheld IR Remote Control, simply point the IR Remote Control towards the RMT Remote and press the selection buttons on the IR Remote Control. RS-232 Control may be had by connecting a DB9 Serial Cable between the RMT Remote's rear panel and a computer or RS-232 control device and issuing RS-232 command strings to the RMT Remote. Finally, the front panel buttons on the RMT Remote may be used to control the remotely located Matrix unit.
A 10-ft shielded CAT5 network cable is included.
9-pin Serial Cables for RS-232 control are not included.
Versatile unit uses 3 methods of remote control: push-buttons, IR, or Serial RS-232 control methodsS
Sturdy metal construction ensures years of productive life
Uses commonly available CAT5/CAT6 network cable
Dimensions: 7.2"W x 1.25"H x 2.5"D
Shipping Weight: 3 lbs.
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.