Vi har åpent fra 07:00-16:00  (man-fre)

Kramer Switch Multi Auto HDBT Kit Scaler

1xHDBaseT - DP HDMI DVI VGA HDCP

Varenr: SID-X2 Scaler KIT
9 500,00
-+
Ubekreftet 29.11.2017
BeskrivelseAlternativerSupport
Beskrivelse
Møteromspakke for små møterom
 
Kramer SID-X2N/VP-427A
Multiformat HDBaseT Transmitter/Reciever
Komplett sett med SID-X2N og VP-427A
 
Vanlige forhåndsregler ved bruk av signalkabler:
• Kablene bør ikke legges tett sammen med strømkabler.
• Pass på bøyradius og unngå kabelkveiler.
• Husk at patchpanel reduserer rekkevidden.
• Kvaliteten på termineringen er viktig ved høyfrekvente signaler.

4-Input Multi-Format Video over HDBaseT Transmitter & Step-IN Commander
Quick Facts
Max Resolution - 1080p @60Hz @36bpp
Control - Local Step-in Input Select (button or Contact Closure)
Size - MegaTOOLS™
Audio - U/E
 
The SID-X2N is an HDBaseT twisted pair transmitter and step-in commander for computer graphics video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals.
 
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
HDTV Compatible.
HDCP Compliant. - Works with sources that support HDCP repeater mode.
HDMI Support - Deep Color, x.v.Color™ and 3D.
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
Data Equalization and Reclocking.
Input Signal Detection - Based on video clock presence.
Automatic Input Selection - Based on manual selection or last connected input.
Automatic Analog Audio Detection and Embedding.
Local Balanced Audio De-Embedding.
Support for Digital Audio Formats.
Lockable EDID.
System Range - Up to 130m (430ft) normal mode; up to 180m (590ft) ultra mode (1080p @60Hz @24bpp) when using BC-HDKat6a cables.
Local Step-In Switching - Button & contact closure.
Power Supply - Requires independent power supply.
Size - MegaTOOLS™
 
Kramer VP-427A
HDBaseT to HDMI & Audio ProScale™ Receiver/Scaler
  
The Kramer VP-427A is a receiver/scaler for HDBaseT twisted pair, HDMI, bidirectional RS-232 and IR signals. The unit receives an HDBaseT signal that it converts to HDMI, IR and RS-232 signals. It up- or down-scales the picture to match the resolution of the HDMI monitor. It includes a simultaneous analog audio output of the embedded HDMI audio.
 
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
Bidirectional RS-232 Port - For embedding/de-embedding control commands in the HDBaseT data stream.
Infrared Input and Output Ports - For controlling devices over the HDBaseT data stream.
System Range - Up to 70m (230ft).
Embedded Audio - Support for LPCM 2CH.
Analog Audio Output - Includes a simultaneous unbalanced stereo audio output of the embedded HDMI audio.
Constant Output Sync - Even when the input video signal is lost or interrupted.
ProcAmp Control - Contrast, brightness, fine tune & R, G, B level/gain.
On-Screen Display (OSD) - For easy setup and adjustment, accessible via the front-panel buttons.
Non-Volatile Memory - Saves final settings.
Freeze Button. 
USB Port - For upgrading firmware. 
Alternativer
Support
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.