LD OXID 12 A *B-vare*
12" powered PA Speaker with DSP
The LD Systems Oxid 12A is an active 12" full-range speaker for compact PAs, monitoring applications, and installations with a 90° x 45° dispersion angle and a total output power of 1000 watts Peak (500 watts RMS).
Three selectable DSP presets optimize the frequency response of the OXID12A for various spheres of application: linear frequency response for normal operation or audio curve corrected response for low volumes or as a floor monitor. Reliable functioning is ensured by protection circuits against overcurrent and short-circuiting and a digital limiter; a switchable ground lift eliminates possible ground loop hum.
The OXID12A is loaded with a 12" neodymium woofer and a 1" ceramic HF driver that are driven separately by a high-efficiency Class D power amplifier with a switchable power supply and a Class AB power amplifier. The frequency response ranges from 50Hz - 20 kHz; the maximum sound-level pressure reaches 128 dB. The input is a combo socket (6.3 mm Jack / XLR) that is switchable to line or microphone level.
The asymmetrical cabinet with a monitor angle is made of rugged polypropylene; two handles simplify transport. There is a built-in speaker pole mount with a locking screw for speaker stands and six recessed M10 threads for flying points.
We recommend to use this speaker with the Stinger SUB 15 A G2 subwoofer if low end extension is required
Product number: LDOXID12A
Product type: PA loudspeaker
Design: DSP controlled
Low/mid driver dimensions: 12"
Low/mid driver dimensions (mm): 305mm
Low/mid driver magnet: Neodymium
Low/mid driver brand: Custom-made
Low/mid driver voice coil: 2,5"
Low/mid driver voice coil: 63,5mm
Tweeter dimensions: 1"
Tweeter dimensions (mm): 25,4mm
Tweeter magnet: ceramic
Tweeter brand: Custom-made
Tweeter voice coil: 1,75"
Tweeter voice coil (mm): 44,4mm
Amplifier: Class D, Class A/B
Dispersion (H x V): 90 x 45
Peak power: 1000W
Frequency response: 50 - 20000Hz
Crossover frequency: 1600Hz
Max. SPL (continuous): 122dB
Max. SPL (peak): 128dB
Integrated media player: no
Protection circuits: short circuit, over-current, DSP-based "look ahead" limiter
Controls: DSP presets, ground lift, volume, input switch (Mic / Line), On / Off
Display: Power, signal, limit
Line inputs: 1
Line input connectors: XLR
Line outputs: 1
Line output connectors: XLR
Operating voltage: Switching Power Supply, 110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, switchable
Cabinet material: polypropylene
Cabinet construction: vented
Monitor angle: 45
Features: switchable DSP presets (monitor, flat, loudness), 6 x M10 flying points, switchable ground lift, 36mm flange, two handles