Vi har åpent fra 07:00-16:00  (man-fre)

WORK® Forsterker Mixer 2x120W

8xin 2xout RS232/485 DMX

Varenr: DCA 1
3 500,00
-+
Ikke på lager (10 dager)
BeskrivelseAlternativerSupport
Beskrivelse

Mixing amplifier with digital audio matrix


DCA 1 is a versatile mixing amplifier with digital audio matrix (8in-2out). It can be remotely controlled from a third party controller (RS 232/485 via ASCII or DMX).

It features two amplified output zones (120 W RMS per channel) and eight mono inputs. Thanks to its microprocessor, it is possible to set up a digital matrix-mixer and control each zone independently or be used as a 2 zone amplifier with remote control input and volume.

Thanks to the RS 485 port, it is possible to use 4 DMX channels to set up the output gain and select the audio source of each output. This all-in-one solution is especially adapted to installations like restaurants or small shops, taking into account that it can be easily integrated itself into an existing network managed by a third-party controller.

Features:

Mixing amplifier with digital audio matrix (8 in / 2 out).
2 independent zones (120 W RMS per zone).
8 mono inputs, one of them with selectable mic priority.
4 DMX channels to set up the output gain and select the audio source of each output.
Full integration in existing networks managed by a third-party controller (RS 232/485 via ASCII or DMX).
Additional output available for monitor (Line).
Large LCD display and controls available on front panel.
Password protection to avoid unwanted handling.

Tekniske Data:

Number of input channels: 1 Mic/Line (mono) + 7 Line (mono).
Number of output channels: 2 powered + monitor.
Line inputs sensitivity: 775 mV / 0 dBu.
Mic input sensitivity: 7.7 mV / -40 dBu.
Input impedance: 20 kohm.
Frequency response: 20 Hz - 20 kHz.
S/N ratio: > 96 dB.
THD+N: <0.01%.
Protections: Overheat, short circuit, DC protection, CLIP.
Output power: 2 x 120 W RMS (4 ohm).
Connectivity: RS232/RS485-DMX.
DMX channels: 4.
Display: Blue backlight 2x16 alphanumeric LCD.
Rear panel connectors: 4 x RCA double (line inputs), 1x XLR3(mic input), 3x Euroblock_3 pin(connectivity), 2 x euroblock_2 pin (powered output), 1x RCA double (monitor output), 1x IEC (Main supply).
Front panel controls: 1x Encoders (Variation,Navigation), 4 x push switch (direct input selection).
Indicators: LCD display, 4 x green led (direct selection), 6 x led (power amplifier status).
Main supply: AC 120 or 240 V, 60/50 Hz.
Power consumption: 250 W.
Dimensions (WxHxD): 483 x 44 x 262 mm.
Weight: 2.5 kg.

Alternativer
Support
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.